Single-direction progressive safety gear applicable for a wide range of loads.Superb solution for car but also counterweight frame installation due to reduced width dimensions (modernization packages available). Brake pads from the automotive industry prevent visible wear on guide rails. Available for many global major elevator norms and directives.
USP's:
- 安全钳作用于下行方向
- 恒定的制动力由预加荷载的盘簧产生
- 在整个制动距离内匀速减速
- 避免磨损的设计
- 可提供适用于不同应用的多种选择
Technical sheet
| Up to 8,00 m/s | |
|---|---|
| Direction | Unidirectional |
| Min. Rated Speed (m/s) | 2,00 |
| Max. Rated Speed (m/s) | 8,00 |
| Max. Tripping Speed (m/s) | 10,50 |
| Min. Mass to be gripped (kg) | 1.500 |
| Max. Mass to be gripped (kg) | 5.000 (duplex 9.500 kg) |
| Min. Rated Load (kg) | - |
| Max. Rated Load (kg) | - |
| UCM Brake/EN 81-21 stopping gear | - |
| Guide Rail Blade (mm) | 16 - 19 |
| Guide Rail Conditions (*) | MD |
| EN 81-20/50:2014 | X |
| GOST R 53870-2010 | X |
| GB 7588 | X |
| KOREA | X |
| ASME A17.1 | X |
| * MO = Machined Oiled DO = Drawn Oiled MD = Machined Dry DD = Drawn Oiled |
|
Downloads
请注意，这只是所有可用文件的一个选择。您可以从服务 > 文件搜索和下载页面访问所有文件，从服务 > 证书搜索页面访问所有证书。