Single-direction progressive safety gear applicable for mid and high rise applications. Superb solution for car but also counterweight frame installation (modernization packages available). Brake pads from the automotive industry prevent wear on guide rails. Available for many global major elevator norms and directives.
USP's:
- Safety gear acting in downward direction
- Constant brake force generated by preloaded disk springs
- Steady deceleration along whole braking distance
- Designed to avoid wearing marks to guide rail
- Several options for different applications are available
- Modernization packages available
Technical sheet
| Up to 12,50 m/s | |
|---|---|
| Direction | Unidirectional |
| Min. Rated Speed (m/s) | 4,00 |
| Max. Rated Speed (m/s) | 12,50 |
| Max. Tripping Speed (m/s) | 14,60 |
| Min. Mass to be gripped (kg) | 2.800 |
| Max. Mass to be gripped (kg) | 10.000 (Duplex 19.231 kg) |
| Min. Rated Load (kg) | - |
| Max. Rated Load (kg) | - |
| UCM Brake/EN 81-21 stopping gear | - |
| Guide Rail Blade (mm) | 15,88 - 16 - 19 - 29 - 32 |
| Guide Rail Conditions (*) | MD |
| EN 81-20/50:2014 | X |
| GOST R 53870-2010 | - |
| GB 7588 | X |
| KOREA | - |
| ASME A17.1 | X |
| * MO = Machined Oiled DO = Drawn Oiled MD = Machined Dry DD = Drawn Oiled |
|
Downloads
Bunun yalnızca mevcut tüm belgelerin bir seçimi olduğunu lütfen unutmayın. Tüm belgelere HİZMETLER > DOKÜMAN ARA VE & İNDİR sayfasından ve tüm sertifikalara HİZMETLER> SERTİFİKALAR ARA sayfasından erişebilirsiniz.